ANALISIS DAYA DUKUNG TIANG AKSIAL TUNGGAL DENGAN METODE STATIS DAN DINAMIS TERHADAP HASIL UJI PILE DRIVING ANALYZE (PDA) PADA PEKERJAAN PONDASI PROYEK JAKARTA BOX TOWER

Abstrak

The purpose of this research is to know the ratio of bearing pile capacity with some static and dynamic calculation method to Pile Driving Analyze (PDA) dynamic test result. The analysis uses static calculations using several methods namely, Meyerhoff, Vesic, α Thomlinson, and α Terzaghi, Peck and Mesri methods.Consultant calculation using Reese & Wright method. Dynamic bearing capacity uses jacking pile record  from Hydrolic System Pile Driving (HSPD)  and Pile Driving Analyze test results. The results showed that Reese & Wright method with SPT is the most closely approximated PDA test result with percentage 74,72%; 76.79% and 82.83% for number of pile 310, 368 and 763. While the result of comparison of jacking pile record that most approached PDA is on pile number 638 with a percentage of 82.83%. The largest settlement results are at pile number 310 and 763 with a decrease of 26.3 mm and 25.9 mm with α Vesic+Terzaghi, Peck and Mesri method