Optimized passive and active shielding of magnetic induction generated by ultra-high-voltage overhead power lines

Abstrak

This paper presents computational modeling to assess and limit the magnetic induction levels emitted by an extra-high-voltage (EHV) overhead transmission line of 750 kV using the fundamental principle of Biot-Savart law in magnetostatics. An optimization technique based on the grey wolf optimizer (GWO) algorithm is employed to determine the appropriate location of the passive and active loop conductors, and the associated parameters to shielding to achieve better compensation of magnetic induction in an interest zone. The resulting magnetic induction of the ultra high voltage (UHV) overhead power line exhibits a crest value of 27.78 μT at the middle of the right-of-way, which can be considered unacceptable by strict protection standards. Generally, the magnetic compensation loops optimally located under the phase conductors of the power transmission system reduce the magnetic induction levels along the transmission line corridor. The passive loop attenuates the maximum magnetic induction by a rate of 29.7%. Therefore, the performance of the active loop is better; it provides a greater reduction with a rate reaching 53.24%. The simulation results were tested with those derived by the elliptical polarization process. An excellent concordance was found, which made it possible to ensure the adopted method.