Dissolved gas analysis comparison of electrically stressed methyl ester and mineral oil

Abstrak

Methyl ester is considered one of the alternative substitutes to mineral oil as an insulating liquid. This study investigates the dissolved gas analysis (DGA) of the methyl ester derived from palm oil, under low energy discharge faults. The aims are to understand the gas composition and evaluate the applicability of the well-established fault interpretation methods for mineral oil to the methyl ester. Experimental procedures were conducted based on the International Electrotechnical Commission (IEC) standards. It involved simulating electrical breakdowns in laboratory conditions as per IEC-156 standard and analyzing gas samples using gas chromatography based on IEC-567. Results show that methyl ester oils produce similar types of gases as mineral oils but at higher concentrations. The interpretation of DGA results using fault identification methods such as Duval Triangle, Duval Pentagon, and IEC ratio indicates an overestimation of fault severity in methyl ester oils, and categorizing the faults as high energy discharge. However, the key gas method correctly identifies the discharge in both methyl ester and mineral oils. These findings suggest the need for adjustments in existing DGA methods to account for the higher gas concentrations in methyl ester oils, for effective condition monitoring and maintenance of transformers if it was filled with methyl ester oil.