Thermal effects of curing parameters on the natural frequency of GNP/Ag ink composites

Abstrak

This research examines how curing temperature and duration influence the electrical and mechanical behavior of hybrid graphene nanoplatelet and silver (GNP/Ag) conductive ink. The ink was formulated from GNPs, silver flakes and silver acetate printed on copper substrates, then cured 240 °C, 250 °C, and 260 °C for one to three hours. Electrical resistance was measured using a Two-Point probe, while natural frequency was obtained from experimental modal analysis (EMA) on stainless-steel (SUS304) cantilever beams laminated with printed ink. The results show that the higher curing temperature and longer curing time reduce resistivity and increase natural frequency, with the best performance observed at 260 °C for 3 hours (8.4×10⁻⁶ Ω.m and a 4.2 Hz increase). These findings confirm that a direct relationship between conductivity and stiffness, where conditions that promote stronger particle bonding also raise structural rigidity. The main contribution of this research is the joint evaluation of curing effects on both electrical and vibrational responses, offering a combined electro-mechanical perspective that is not often explored in GNP/Ag ink research. The results provide practical guidance for selecting curing conditions based on the required balance between conductivity and mechanical stability in flexible and stretchable electronic applications.