Publiora

Menghubungkan ke Publiora...

Publiora

Preparation and Performance of a Fixed Bed Catalyst for the Oxidation of Sodium Mercaptides

Heming, WangXianshang, LiuLijun, ZhuYulu, ZhouDaohong, Xia
Bulletin of Chemical Reaction Engineering & Catalysis (Sinta 1)Vol. 0 No. 030 Agustus 2014
DOI10.9767/bcrec.9.2.5113.87-92

Abstrak

The activated-carbon supported cobalt pthalocyanine as a fixed bed catalyst (CoPc/C) was prepared by impregnation method and its performance on the oxidation of sodium mercaptides in light oil sweetening was investigated. The FTIR, XRD, and SEM analysis indicated that the active component dispersed well on the carrier and the results of the TG analysis showed that CoPc/C has good thermostability. It was tested that the prepared catalyst has a high catalytic activity towards sodium mercaptides. The removal rate of n-C4H9SNa was up to 100 % and for t-C4H9SNa, was 87.5% at a reaction time of 30 min. With the reaction temperature raised from 20 °C to 60 °C at intervals of ten degrees, the oxidation rate increased obviously, especially in the first ten minutes. A kinetic model mainly related to the transfer process was supposed. The catalyst CoPc/C had a good anti-loss performance of the active component both in water and alkali liquor when used. © 2014 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0)

Kata Kunci

fixed bed catalystsweeteningoxidationsodium mercaptidelight oil

Cari jurnal yang tepat untuk naskah Anda

MatchMind AI mencocokkan abstrak naskah Anda dengan ribuan jurnal terakreditasi dan menampilkan rekomendasi terbaik beserta alasannya.

Coba MatchMind

Lihat profil lengkap jurnal ini

Waktu review, biaya APC, statistik sitasi, indeksasi Scopus, dan banyak lagi.

Buka Bulletin of Chemical Reaction Engineering & Catalysis

Artikel ini juga tersedia di situs resmi jurnal.

Preparation and Performance of a Fixed Bed Catalyst for the Oxidation of Sodium Mercaptides | Bulletin of Chemical Reaction Engineering & Catalysis | Publiora